油罐槽车软管专为公路铁路槽罐车使用特点设计，柔软轻便，弯曲自如，适合频繁弯曲移动使用，
性能，是通用槽罐车软管。
Oil tanker special hose.The design of oil tanker special hose designed for highway and railway tank car use characteristics.Soft light,supple,suitable for mobile use frequent bending.
The antistatic performance is reliable,the international general tank hose.
凯达多用途复合软管技术参数
Kaida multipurpose composite hose technology parameters
规格型号 specifications and models | 工作压力 working pressure | 长度（m）+ 5% length | 使用温度℃ temperature | 电阻（Ω） resistance | 弯曲半径 bending radius （mm）+100 | 重量 weight kg/m+1 | |||
（mm) | in | MPa | Psi | 15米 | - 40℃ ~ +130℃ | 碳钢类 carbon steel | 不锈钢类 stainless steel | 220 | 1.5 |
DN25 | 1 | 0.6-1.6 | 87-232 | ≤10（Ω） | ≤20Ω | ||||
DN32 | 1¼ | 1.8 | |||||||
DN40 | 1½ | 220 | 2.0 | ||||||
DN50 | 2 | 300 | 2.4 | ||||||
DN65 | 2½ | 2.6 | |||||||
DN80 | 3 | 350 | 3.5 | ||||||
DN100 | 4 | 400 | 5.8 | ||||||
DN125 | 5 | 0.6-1.0 | 87-145 | 12米 | 500 | 6.5 | |||
DN150 | 6 | 570 | 10.5 | ||||||
DN200 | 8 | 800 | 15 | ||||||
DN250 | 10 | 1100 | 22 | ||||||
DN300 | 12 | 1200 | 28 | ||||||
注：本册工作压力是在温度为30℃+2℃时的测试结果。
软管规格型号均为软管内径尺寸，允许误差+4mm（如内径有变动，外径也相应的变动），耐压拉伸长度为10%。
所有软管按用户要求在工厂安装接头，接头可选用法兰、接头、螺纹。接头材质可选用不锈钢。碳钢。铝合金材质。接头连接的软管，口径可做到DN200。
本册软管技术参数仅供参考，不同规格。用途。重量。使用压力与弯曲半径会有所不同，详情请向凯达公司咨询。
Note:this book working pressure is at a temperature of 30℃+2℃test results of.Hose specifications are hose diameter size,permissible error+4mm.（If the inner diameter changes,outer diameter is also a corresponding change）The pressure maximum tension length10%.
All hoses according to user requirements in installation of joint factory.Joint can be selected,quick couplings,threaded flange.Joint material:stainless steel carbon steel.The aluminum alloy material.Quick joint connecting hose,the largest diameter can doDN200.
