船舶输油管

软管内钢丝采用重型热镀锌钢丝，内夹层为聚丙烯纺织物、聚丙烯膜。耐油织物，外壁采用阻燃。。的材料，

外钢丝为重型热镀锌钢丝，用于船到船、船到岸的油品传输装卸，能在正负压条件下输送各种油品及芳香烃产品，设计中已将海上、海岸的复杂工况，

如风、浪、船的晃动、自重及操作因素考虑进去，能在较复杂工况下用于输送任何油品，如汽油。柴油。煤油。原油等。采用材料制造，

外保护层具有的抗磨、性，适合在腐蚀性较强的恶劣海岸环境中使用。是油管系列中最坚实的一款，具有柔韧、、、特性，导静电设计。

Marine abrasion antistatic oil hose.Hose steel wire with high strength heavy hot galvanized steel wire.The interlayer is a special high strength polypropylene textile material,polypropylene film high temperature resistant oil resistant fabric.The outer wall of the use of flame retardant.Anti aging resistant materials with high temperature resistance.Outer steel wire for high strength heavy hot dip galvanized steel wire,used to ship oil to the transport of cargo handling,ship to shore.It can transport all kinds of oil and aromatic hydrocarbon products in the positive and negative pressure condition.The design has the complex condition of the sea,the coast.As the wind,wave,the movement of the boat,weight and operation factors into consideration.In a complex condition for any transfer of oil products such as gasoline,diesel oil and so on kerosene.Making use of high-quality corrosion resistant material.The outer protective layer has excellent abrasion resistance,aging resistance,suitable for use in corrosive environment of strong bad coast.Tubing is a series of the most solid,with a flexible,strong,safety,durability,antistatic design.

凯达多用途复合软管技术参数

Kaida multipurpose composite hose technology parameters

注：本册工作压力是在温度为30℃+2℃时的测试结果。

软管规格型号均为软管内径尺寸，允许误差+ 4mm（如内径有变动，外径也相应的变动），耐压   大拉伸长度为10%。

所有软管按用户要求在工厂安装接头，接头可选用法兰、接头、螺纹。接头材质可选用不锈钢、碳钢、铝合金材质。接头连接的软管，   大口径可做到DN200。

本册软管技术参数仅供参考，不同规格、用途、重量、使用压力与弯曲半径会有所不同，详情请向凯达公司咨询。

宁波船舶输油管　上海船舶输油管